Jackson Marine

Traditional norfolk broads cruiser repairs, restorations, sales & supplies

Please note all prices

INCLUDE VAT

SP 106 is a simple to use, all-purpose epoxy which can be used for gluing, coating, laminating and filling. With its range of hardeners, and easy 5:1 mix ratio by volume, SP 106 provides a quick and convenient way of using one epoxy system for a very wide range of tasks.
SP 106 has been established since the early 1980s as the primary epoxy system for the manufacture and repair of wooden boats, and it is now widely used in many other woodworking applications from cabinet making to the manufacture of large wooden moulds. With its extra slow hardener SP 106 can be used for jobs requiring a long working time, or in ‘tropical’ conditions of high ambient temperatures.
In its unmodified form, SP 106 can be used as a clear coating for wood and other substrates, or for laminating lightweight glassfibre fabrics such as those used for reinforcing joints. When used for clear coating, cured SP 106 should be overcoated with any good two pack polyurethane.

SP 115 is a low viscosity, ultra-clear epoxy laminating system. It has been designed for the manufacture of laminates which are to remain unpainted, and where a very clear finish is required. The material also contains blue UV filters which give the product its characteristic transparent pale violet/blue colour. These filters both enhance the sharpness of embedded graphics and, when overcoated with a suitable UV-screening PU varnish, will reduce the tendancy of clear laminates to yellow after prolonged exposure to sunlight.
SP 115 also exhibits a high degree of toughness and water resistance, enhancing the strength and damage tolerance of the thin laminates typically used in sail and surfboard manufacture. Being completely solvent and styrene-free, polystyrene foam blanks can be safely used to produce boards of the lightest possible weight.

Eposeal 300 is a solvent-based, low viscosity epoxy sealer. It has been developed primarily for use on wood but can also be used on other materials such as GRP, stone, ferrocement, brick, etc. Eposeal 300 has an extremely low viscosity which ensures that the product achieves rapid and deep penetration of porous surfaces.
Once Eposeal 300 material has soaked into a surface, the adhesive nature of the epoxy base will help to consolidate and strengthen that surface. The resultant epoxy sealing layer provides a high adhesion and moisture resistant base for any type of paint, varnish or epoxy coating system. For example, many woodworking applications combine the penetrating power of the Eposeal 300, with the thick, clear coating capability of SP 320 to produce a strong, highly protective, deep gloss surface on wood.
The solvents used in Eposeal 300 evaporate quickly once the product is brushed out, so that subsequent layers of Eposeal 300 can be applied in quick succession. Providing the lid is replaced on the mixing pot, the long pot life of Eposeal 300 means that just one mix can be used for multiple coats.

SP 320 is a solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to. When used for coating wood, just a few coats will provide both protection and a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish. The epoxy coating will protect most surfaces from moisture ingress, and will also add strength to softwood surfaces. On horizontal surfaces, SP 320 may be poured on as a flow-coat, providing an instant, thick coating layer in just one application. If the coating is to remain unpainted, the cured material should be overcoated with a UV-resistant varnish, since an unprotected epoxy coating will gradually yellow in sunlight.
Whilst primarily designed as a coating, SP 320 is completely solvent-free and so can be mixed with the Gurit Filler
range to produce filling compounds, adhesives and fillet mixes.

VERSATILE : Bonds wood, stone, metal, ceramics, foam, glass, brick, concrete and more...
100% WATERPROOF : does not break down when exposed to outdoor elements.
Easily passes ANSI/HPVA HP-1-2000 Types 1 and 2.
TEMPERATURE RESISTANT : once its dry Gorilla Glue is unaffected by extreme heat or cold.
SANDABLE, PAINTABLE & STAINABLE : the invisible glue line makes finishing easy

SP Handipack