INCLUDE VAT
A standard gloss alkyd based paint for Commercial and Pleasurecraft vessel bilges.
A flexible high gloss paint, designed for both commercial and pleasure craft applications and is both durable and resistant to salt water atmospheres.
An extremely quick drying, anti-corrosive primer, designed specifically for structural steelwork applications. Drying Time: 20 minutes
Epifanes Mono-urethane a one part urethane paint developed to give the tough durability of a two-part system while providing the application ease of standard enamels. The finish results in a higher gloss than given by conventional urethane methods and fully cures in just 24 hours.
This paint is especially manufactured for fiberglass and can be directly applied in two coats on bare fiberglass. 750 ml. Covers 15 m². It is also suitable for wood, steel and aluminium.
CONTACT US ABOUT WHICH COLOUR YOU WOULD LIKE BEFORE ORDERING
Epifanes Yacht Enamel (one-pot) a high gloss, one component, alkyd-based, traditional marine finish. This enamel has very good flowing and covering properties and provides long lasting gloss retention and excellent weather durability.
CONTACT US ABOUT WHICH COLOUR YOU WOULD LIKE BEFORE ORDERING
Epifanes Poly-urethane a high gloss, two component, polyester saturated, aliphatic coating with excellent outdoor durability and weather resistance. The finish provides easy application by brush, roller, or spray
CONTACT US ABOUT WHICH COLOUR YOU WOULD LIKE BEFORE ORDERING
Epifanes Nautiforte Yacht paint, one part, air cure, based on silicon reinforced alkyd resins. The ultimate finish provides longer lasting high gloss with minimal dirt retention. Due to its colour stability and high UV resitance yellowing is reduced to an absolute minimum.
CONTACT US ABOUT WHICH COLOUR YOU WOULD LIKE BEFORE ORDERING
Epifanes NonSkid DeckcoatingExceptionally strong, urethane-alkyd based single part deck coating. It comes pre-mixed with polyurethane beads. Two coats insure a long lasting textured surface for non-skid protection
CONTACT US ABOUT WHICH COLOUR YOU WOULD LIKE BEFORE ORDERING
Epifanes Multiforte is a quick-drying, hard, abrasive resistant topcoat for interior and exterior use. To be used in conjunction with the appropriate (one component ) primers.
Provides excellent adhesion and resistance to wear and tear. Highly recommended for use on decks and gangways.
CONTACT US ABOUT WHICH COLOUR YOU WOULD LIKE BEFORE ORDERING
Metalprimer: a one-component lead-free anticorrosive primer for use on bare steel in a one-component paint system above the waterline. Suitable for interior and exterior use. Excellent rust-prevention. Good hiding. Easy to sand. Recoatable with all Epifanes one-component paints
A high quality, ‘hard’ Anti-foul, to be used on steel or wooden hulls of both sea and inland waterway boats. Designed specifically for pleasure craft and has inherently high resistance to weed and animal growth. Formulated using tin-free technology and is non-toxic to marine life.
Flexible black underwatercoating for the ( underwater ) protection of steel and wood. Also suited for repair and/or maintenance of existing (coal-)tar layers. May also be used for application above the waterline. Colour fast and resistant to alternate immersion and influences of air.
You are viewing the text version of this site.
To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.
Need help? check the requirements page.